Channel views:2113
Uploaded videos:9
[ 2021-07-27 14:41:00Z ]👍 3
Channel views:2113
Uploaded videos:9
[ 2021-07-28 21:45:25Z ] 👍 2
@MrGareth1973 Thanks to you and Kai for the advice. I'll try this and reply to you later with the results. I hope that works... but... I don't think Cyberpunk is running beyond 120 fps on my machine LOL!
Channel views:180
Uploaded videos:1
[ 2021-07-28 13:19:14Z ] 👍 3
@Angellmbrr Yeah, as has ALWAYS been the case with G-Sync, you need to be just under the max fps of your screen for it to work properly. So you set an FPS limiter to 117 fps (accesible in nvidia control pannel), or you live with v-sync and add a bit of input latency. My G-sync monitors with module have the same "problem". Go have a read over at blurbusters, they have an excellent in-depth guide on all of this.
Channel views:0
Uploaded videos:0
[ 2021-07-28 10:52:13Z ] 👍 2
@Angellmbrr Try using Max Frame Settings in Nvidia 3D settings and limit it to 116. Maybe you have tearing because your FPS goes beyond 120. With max frames limited to 116 you will never go out of gsync range and you do not need vsync on. I hope this solves your issue,
Channel views:2113
Uploaded videos:9
[ 2021-07-27 19:54:55Z ] 👍 1
@kallestofeles The 3080 Ti Detects the C1 as a G-Sync compatible monitor, the G-Sync is also enabled in the Nvidia control panel and it works with some games vsync off (like Doom eternal, GTA V, Dying Light) but I can see tearing in other games unless I enable vsync (like Cyberpunk, FFXV) and even tearing happens on the Nvidia's Pendulum demo, but this happens randomly. I have played changing the resolutions and refresh rates in Nvidia control panel and on the C1 but I found that some games still need to enable VSYNC... What's the point of C1 having compatibility with G-Sync if I have to enable vsync to eliminate tearing? If I only can show you what I experience so you can see it...
Channel views:311678
Uploaded videos:134
[ 2021-07-27 19:31:44Z ] 👍 2
Thanks for re-visiting! What's up with "sometimes" working adaptive sync with a 3080Ti? 😮
Channel views:1711
Uploaded videos:7
[ 2021-08-02 02:15:13Z ]👍 1
Channel views:0
Uploaded videos:0
[ 2021-08-04 14:09:09Z ] 👍 0
Have 48c1 and its dimmer the picture
Channel views:311678
Uploaded videos:134
[ 2021-08-03 16:37:26Z ] 👍 1
Regarding simply the image quality, nothing has changed that I've noticed - should be all good in that regard.
Channel views:311678
Uploaded videos:134
[ 2021-08-03 16:36:37Z ] 👍 0
This is some good information. Thank you for sharing!
Channel views:435
Uploaded videos:1
[ 2021-08-02 06:25:38Z ] 👍 1
.27 already bloqued mp4 dual layer dolby vision playback
Channel views:16066
Uploaded videos:5
[ 2021-08-02 03:28:43Z ] 👍 2
Doesn’t effect the picture. Perfectly safe on my end
Channel views:132
Uploaded videos:1
[ 2021-08-02 10:24:14Z ]👍 1
Channel views:148228
Uploaded videos:145
[ 2021-08-02 14:11:15Z ]👍 1
Channel views:0
Uploaded videos:0
[ 2021-08-10 00:48:55Z ]👍 1
Channel views:311678
Uploaded videos:134
[ 2021-08-10 06:10:05Z ] 👍 0
Thank you Cristian, more OLED experiments on the way.💜😉
Channel views:301
Uploaded videos:2
[ 2021-09-14 04:04:08Z ]👍 1
Channel views:311678
Uploaded videos:134
[ 2021-09-15 19:01:27Z ] 👍 0
This time around, I have found 0 changes to anything besides the update resetting every input profile, which was a bit annoying. 😃
[ 6417 ]
[ 5757 ]
[ 1960 ]
[ 2357 ]
[ 713 ]
[ 1040 ]
[ 32805 ]
[ 859 ]












