Hello everyone. Weve noticed that many of you had questions regarding spall liners on tanks and armor in general. To avoid any misunderstandings, wed like to briefly answer some of these elements below.

The effectiveness of the M1 Abrams

Well soon be releasing a dev blog on the hull armor for the M1 Abrams series of tanks, where well explain why we believe that hull armor was not reinforced on production vehicles. However, were not satisfied with the current effectiveness of all M1 variants with a 120 mm gun, so were looking at other ways to improve them. The first consideration is the addition of a new M829A3 shell which weve also seen requests and suggestions for. Weve discussed this option, but the addition of this shell in comparison with the M829A2 will not enhance the Abrams capability against top-tier vehicles that are equipped with modern armor and built-in ERA systems. Were still considering the possibility of adding the M829A3 shell, but as a first change, were going to increase the rate of fire of first-stage ammo from 6 to 5 seconds per shot on an Ace level crew, whichll make the Abrams more effective against all opponents. This rate of fire is possible considering the size and weight of most shells for 105 mm guns are comparable to shells for a 120 mm gun. This is due to the fact that the 120 mm cartridge case is partially combustible, while the 105 mm case is metal. For example, a 105 mm shell with an M900 projectile has a length of 1003 mm and a weight of 18.5 kg, and a 120 mm M829A2 has a length of 982 mm and a weight of 20.3 kg.

The Leopard 2A7Vs armor

We always try to bring the characteristics of vehicles presented in the game as close as possible to the documented characteristics of real vehicles. In the case of the protection of the Leopard 2A7V, we rely on information about the Leopard 2 armor package presented at the Swedish tender. We have no reliable evidence that armor enhancements compared to the prototype submitted to the Swedish tender were ever carried out, nor the level to which the armor could have been enhanced if this had been done, so at this time we dont believe that its possible to further enhance the protection of this tank. As for the difference in protection between the Swedish versions of the Leopard 2 and the German Leopard 2A7V (the Swedish versions have more, which may seem illogical). This is due to the fact that the Swedish versions of these tanks received their own, completely new, reinforced armor package of their own production, both in the hull and and on the turret (which is also confirmed by protection data obtained in tests for the tender). At the same time, wed like to note that the current level of protection of the Leopard 2A7V currently is that the majority of the frontal area is protected against any 120-125 mm APFSDS presented in the game. Regarding the slightly lower turret protection than the Leopard 2A6, small differences in durability within ~2~5% do not affect this tanks protection, and are due to the difference in vehicle geometry. In the near future, we will update the DM for Leopard 2 tanks, therefore correcting any minor discrepancies. Wed also like to separately note that some players believe that the protection of the Leopard 2A7V presented in the game is based on the B package. However, according to the data we have, this is not the case. As you can see from the armor resistance diagrams from the Swedish tender, the mounted package D-2 in combination with package B provides protection of only 45% of the frontal projection from APFSDS with a penetration of 600mm, but in the game a different combination of armor protection packages is presented, providing protection of more than 65% of the frontal projection from threats of this type.
Protection of Leopard 2I (improved), based on B package with an add-on kit of D-2: more than 55% vulnerable to APFSDS with a penetration of 600mm.
Armor map in the game: less than 35% of the projection is vulnerable to APFSDS with a penetration of 600mm.

Spall liners for the Ariete, Merkava and Leclerc

Were currently studying and adding spall liners for Ariete tanks. These tanks will receive spall liners in a future update. As for the Merkava series of tanks, we have information that these tanks do not have spall liners. Weve studied information from open sources and apart from armored steel, we did not find any other protection on the sides of the Merkavas fighting compartment. At the moment we dont have reliable data from open sources about the precedence of spall liners on the Leclerc series of tanks.

Battle Rating 12.7 for Aviation

Were closely monitoring the data and believe that at the moment, theres no need for an increase to the current Battle Rating threshold for aviation from 12.3 to 12.7. This is because the current efficiency of all new aircraft except the JAS39s is at the level of previously introduced Battle Rating 12.3 aircraft. As for the Gripens, their flight model has been revised, and well monitor their effectiveness after these changes.

Tornado IDS WTD61

We decided not to expand the range of weapons of the Tornado IDS WTD61, since were not sure that this aircraft could carry a targeting pod and guided bombs. However, were closely monitoring this aircrafts performance and are ready to make other changes if necessary.

Topics for upcoming Development blogs

Were working on your reports on the Challenger 2 series of tanks, and many of these issues have already been fixed. Well publish answers to some questions regarding these tanks in the near future. In addition to this, a development blog about the changes to the parameters of Stinger and Mistral MANPADS missiles is planned for release in the very near future, so keep an eye out on the news for that.

[ 2023-12-22 09:38:40 CET ] [ Original post ]