UPDATE: Localizations (es: achievements, research; hu: achievements; it: achievements, ui; de: research; nl: research, tutorials, ui; ru: ui; zh-Hans: ui)
FIX: Attach loco shunting command in invalid queue prevented opening of shunting queue editing
FIX: Conductor Office returned to Berlin & Wroclaw maps after upgrade
FIX: Contracts with a leg without mandatory stop caused error when Regional Contract Manager was configured (and were rejected by the manager without consideration)
FIX: Double click on Play the Map button in Editor caused double saving & map corruption
FIX: If train overshot a platform (e.g. after reusing while moving over it), it never moved again
FIX: Impossibility to attach a loco to a train at the very end of the track (e. g. loco detached after pushing the train to the signal, then running around)
FIX: It was possible to configure Regional Contract Manager even when its upgrade was not installed
FIX: Recalculate schedule and topology buttons where shown on the bottom bar in play mode when editing a contract
FIX: Set arrival to current time button was shown outside of the editor when editing a contract
FIX: Stop time longer than 2 hours was wrongly formated
FIX: Timetable mode train bottom bar was too tall because research point awards were still shown
FIX: Typo in en text
FIX: Upkeep was not accounted to Operational Turnover and Total of Cycle Report
[ 2024-01-08 08:55:07 CET ] [ Original post ]
- Rail Route [linux] [280.41 M]
Manual Routing
Manual Routing is basic mode to control the rail roads from the beginning of the game. You set up switches and signals one by one. Nothing but your skill and focus prevent collisions.Automated Routing
Automated Routing helps when traffic becomes busy on a complex yard. You need a few clicks to set up all switches and signals en route. Collision avoidance included. Available later in the game when you unlock it and upgrade the signals.Building
Build your own rail network to optimize the traffic. Be creative and fill every possible space you have.Automation
Automation allows you to operate your railway network without your hands on. Your growing traffic does not lock you in the operations, freeing your hands for further expansion. You build the automation sensors and set up route to create when trains go by.Level Editor
Level editor allows you to create a custom board with everything that comes with it. Create a schematic of your hometown rail roads, your imaginary rail network or even model the Tube rapid transit system using it! The rectangles you see moving can be modern or historic trains, the underground trains, trams, monorails, just whatever you imagine.- OS: Linux 64bit
- Processor: 1.6 GHzMemory: 1 GB RAMStorage: 1 GB available space
- Memory: 1 GB RAMStorage: 1 GB available space
- Storage: 1 GB available space
- OS: Linux 64bit
- Processor: 2.4 GHzMemory: 2 GB RAMStorage: 1 GB available space
- Memory: 2 GB RAMStorage: 1 GB available space
- Storage: 1 GB available space
[ 5944 ]
[ 1567 ]
[ 1755 ]
Time left:
356381 days, 6 hours, 36 minutes
Time left:
5 days, 13 hours, 36 minutes
Time left:
8 days, 13 hours, 36 minutes
Time left:
12 days, 13 hours, 36 minutes
Time left:
37 days, 13 hours, 36 minutes
Time left:
8 days, 13 hours, 36 minutes
Time left:
47 days, 13 hours, 36 minutes
Time left:
52 days, 13 hours, 36 minutes
Time left:
3 days, 7 hours, 36 minutes
Time left:
4 days, 7 hours, 36 minutes
Time left:
6 days, 7 hours, 36 minutes
Time left:
11 days, 7 hours, 36 minutes
Time left:
11 days, 7 hours, 36 minutes
Time left:
13 days, 7 hours, 36 minutes
Time left:
13 days, 7 hours, 36 minutes
Time left:
13 days, 7 hours, 36 minutes
Time left:
18 days, 7 hours, 36 minutes
