NEW: Custom contract number used as base for clone numbers
UPDATE: Car collider adjusted to prevent train crashes when switch is already deallocated but vehicle still obstructs it visually
UPDATE: Click on save name initiates its editing
UPDATE: Ignore signals without shunting circuit when testing alternative detach-towards signals at shunting group track
UPDATE: In Departure Sensor configuration, when a destination is reachable from both platform signals, both routes are highlighted
UPDATE: Newly created map in Editor is immediately saved to appear in Main Menu
UPDATE: Unity version to 2021.3.44f1 to fix Mac double-click problems
FIX: Bounding wall ignored loaded walls, cutting out pre-designed corridors
FIX: Construction task was not initialized in the correct moment during the tutorial so the Time Saver achievement was never unlocked
FIX: Departure Sensor was not acting when a train was heading towards sink
FIX: Dispatching from Coach Yard in reversed order flag was not applied to custom contract clones
FIX: Same delay entries were logged multiple times
FIX: Waypoint with player-increased duration was stored as preset, causing inability to shorten the stop for any subsequent contract havning the same pattern
[ 2024-10-21 07:06:47 CET ] [ Original post ]
- Rail Route [linux] [280.41 M]
Manual Routing
Manual Routing is basic mode to control the rail roads from the beginning of the game. You set up switches and signals one by one. Nothing but your skill and focus prevent collisions.Automated Routing
Automated Routing helps when traffic becomes busy on a complex yard. You need a few clicks to set up all switches and signals en route. Collision avoidance included. Available later in the game when you unlock it and upgrade the signals.Building
Build your own rail network to optimize the traffic. Be creative and fill every possible space you have.Automation
Automation allows you to operate your railway network without your hands on. Your growing traffic does not lock you in the operations, freeing your hands for further expansion. You build the automation sensors and set up route to create when trains go by.Level Editor
Level editor allows you to create a custom board with everything that comes with it. Create a schematic of your hometown rail roads, your imaginary rail network or even model the Tube rapid transit system using it! The rectangles you see moving can be modern or historic trains, the underground trains, trams, monorails, just whatever you imagine.- OS: Linux 64bit
- Processor: 1.6 GHzMemory: 1 GB RAMStorage: 1 GB available space
- Memory: 1 GB RAMStorage: 1 GB available space
- Storage: 1 GB available space
- OS: Linux 64bit
- Processor: 2.4 GHzMemory: 2 GB RAMStorage: 1 GB available space
- Memory: 2 GB RAMStorage: 1 GB available space
- Storage: 1 GB available space
[ 5975 ]
[ 1709 ]
[ 1755 ]
Time left:
356380 days, 22 hours, 49 minutes
Time left:
5 days, 5 hours, 49 minutes
Time left:
8 days, 5 hours, 49 minutes
Time left:
12 days, 5 hours, 49 minutes
Time left:
37 days, 5 hours, 49 minutes
Time left:
8 days, 5 hours, 49 minutes
Time left:
47 days, 5 hours, 49 minutes
Time left:
52 days, 5 hours, 49 minutes
Time left:
2 days, 23 hours, 49 minutes
Time left:
3 days, 23 hours, 49 minutes
Time left:
5 days, 23 hours, 49 minutes
Time left:
10 days, 23 hours, 49 minutes
Time left:
10 days, 23 hours, 49 minutes
Time left:
12 days, 23 hours, 49 minutes
Time left:
12 days, 23 hours, 49 minutes
Time left:
12 days, 23 hours, 49 minutes
Time left:
17 days, 23 hours, 49 minutes
